Search results for "Grain size"
showing 10 items of 131 documents
Microstructure and electric properties of low-pressure plasma sprayed β-FeSi 2 based coatings
2017
Abstract Thermoelectric material β-FeSi 2 based coating was fabricated by the technique low-pressure plasma spray (LPPS) on the Al 2 O 3 substrate from different alloy powders. During the process LPPS, the phase transformation had occurred through the peritectoid, eutectoid reaction and their inverse reaction. The grain size of the as-sprayed β-FeSi 2 doped Co coatings was reduced comparing with the original feedstock powders, which implied the thermal conductivity could effectively decreased by the LPPS process. The room temperature electrical conductivity showed metal and semiconductor properties on the as-sprayed and annealed coatings. This method and the results could solve the problems…
Effect of surface disorder on the domain structure of PLZT ceramics
2017
ABSTRACTPb1-xLax(Zr0.65Ti0.35)1-x/4O3 (PLZT x/65/35) ceramics were studied by Piezoresponse Force Microscopy in order to understand the origin of domain structure as a function of La content. We show that the domain topology is mainly determined by the composition and grain size. The characteristic correlation length decreases with increasing La content, being sensitive also to the synthesis method. The behavior of the correlation length is linked to the macroscopic properties, showing a strong increase of disorder with La doping. The roughness exponent for the domain wall in PLZT 9/65/35 is close to 2/3 indicating 1D character of domain walls in relaxors.
Production of dense nanostructured materials using FAPAS and SPS techniques
2011
International audience
Strain rate dependence for evolution of steady state grain sizes: Insights from high-strain experiments on ice
2019
Abstract Understanding of the microstructural evolution and equilibrium grain size development during steady state tertiary flow is essential in order to improve our knowledge of ice and rock deformation. This contribution presents results from in situ transmitted light deformation experiments of natural glacier ice, with the development of the microstructure in a tertiary flow regime. We conducted one relative slower ( 1 × 10 − 6 1/s) and two relative faster-strain rate ( 2 × 10 − 6 1/s) pure shear experiments at −10 °C, up to a shortening of ∼57%. Microstructure development was followed by time-lapse observations, and two new microstructure-based indicators, the ‘seeding rate’ and the ‘mi…
Effect of strain rate cycling on microstructures and crystallographic preferred orientation during high-temperature creep
2016
Strain rate histories and strain magnitude are two crucial factors governing the evolution of dynamic recrystallized grain size and crystallographic preferred orientation (CPO) in rocks and ice masses. To understand the effect of cyclic variations in strain rate or non-steady-state deformation, we conducted two-dimensional, coaxial plane strain experiments with time-lapse observations from a fabric analyzer. There is a continuous reequilibration of microstructure and CPO development associated with constant and oscillating strain rate cycles. These can be correlated with c -axis small circle distributions, diagnostic of dynamic recrystallization involving new grain nucleation and grain boun…
Intermediate-depth earthquake generation and shear zone formation caused by grain size reduction and shear heating
2015
cited By 23; The underlying physics of intermediate-depth earthquakes have been an enigmatic topic; several studies support either thermal runaway or dehydration reactions as viable mechanisms for their generation. Here we present fully coupled thermomechanical models that investigate the impact of grain size evolution and energy feedbacks on shear zone and pseudotachylite formation. Our results indicate that grain size reduction weakens the rock prior to thermal runaway and significantly decreases the critical stress needed for thermal runaway, making it more likely to result in intermediate-depth earthquakes at shallower depths. Furthermore, grain size is reduced in and around the shear z…
Modelling of stylolite geometries and stress scaling
2012
International audience; In this contribution we present numerical simulations of stylolite growth to decipher the effects of initial rock heterogeneity and stress on their morphology. We show that stylolite growth in a rock with a uniform grain size produces different patterns than stylolite growth in a rock with a bimodal grain size distribution. Strong pinning of large heterogeneities produce stylolite structures that are dominated by pronounced teeth, whereas a uniform grain size leads to spikes and a roughness that shows variable wavelengths. We compare the simulated stylolites with natural examples and show that the model can reproduce the real structures. In addition we show that stro…
Dating Bulk Sediments from Limnic Deposits Using a Grain-Size Approach
2013
Radiocarbon measurements on bulk subaqueous sediments typically provide ages significantly older than actual time of deposition. This is generally caused by the presence of reworked organic compounds, which are depleted in 14C. To explore this issue of age heterogeneity, we collected 4 organic-rich samples from varying depths in a lake sediment core at the Gemündener Maar (Eifel, Germany), a lake of volcanic origin. We divided each sample into 5 standard grain-size fractions: gravel, sand, silt, clay, and 1 fraction smaller than 0.45 μm. These were cleaned separately using a standard acid-alkali-acid treatment. The highly organic gravel-size fraction provided the youngest 14C ages of all gr…
Enhancement of mechanical properties of FSWed AA7075 lap joints through in-situ fabrication of MMC
2017
Abstract Friction Stir Processing (FSP) has been demonstrated feasible to create local Metal Matrix Composites (MMCs) in light alloys matrix. In this research, local MMCs were produced contextually to the weld using Friction Stir Welding (FSW). SiC particles were added to AA7075 lap joints by creating a proper groove on the top surface of the bottom sheet. Different welds were produced with increasing number of tool passes. The effect of the multiple passes was investigated through shear tests, macro and micro observations, average grain size and microhardness measurements. The welded joints were compared to a reference weld produced with no reinforcements. It was found that poor mixing bet…
In-process control strategies for friction stir welding of AZ31 sheets with non-uniform thickness
2017
Two different in-process control strategies were developed and compared with the aim to produce AZ31 magnesium alloy joints by friction stir welding on sheet blanks with a non-uniform thickness. To this purpose, sheets with dip or hump zones were welded by either changing the rotational speed or the tool plunging in order to keep constant the value of the vertical force occurring during the welding stage of the process. The influence of the main process parameters on the tool force, the micro- and macromechanical properties, and the joints microstructures in the dip and hump zones were analyzed. The results showed that using the rotational speed change-based approach, the hump zones are sub…